Do it yourself
Frequently asked questions about cars and motorcycles

How to Top Off the Engine Oil of the Volvo XC60?

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine oil

See other generations:
Video tutorial

To top off the engine oil of the Volvo XC60, open the hood to access the components in the engine compartment. In the center of the engine block, locate the oil filler cap. Unscrew it to add the necessary amount of new oil into the reservoir.

Once the oil is added, replace the cap and check the oil level using the dipstick. After completing the process, close the hood.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

Volvo Xc60 (2008-2016 / MK 1) Below are the instructions on how to perform routine maintenance by replacing the engine oil and oil filter on the Volvo XC60. Before resetting the s…
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos