Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the service light on the Volvo XC60 2017?

Model: Volvo Xc60 MK 2 - Years 2017-2025
Part: Service warning light

In this video guide, we will see how to reset the service light in the 2017 Volvo XC60. As usual, turn on the car's instrument panel by pressing the button located in the center console. Once done, press and hold the Multifunction button on the left side of the steering wheel to display the active lights on the mentioned instrument panel. Now, simply press the Engine button to start the engine, release the previously mentioned multifunction button, press it again, and hold it for 10 seconds. The operation is complete.

Posted on 17 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Volvo XC60?
How do you reset the Service light on the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on the Volvo XC60, you need to hold down the TRIP button located on the right side of the instrument panel while it is tur…
Resetting the Volvo XC60 service indicator light.
Resetting the Volvo XC60 service indicator light.
Volvo Xc60 (2008-2016 / MK 1) Below we will see the necessary procedure that will allow us to reset the service light for the regular maintenance of the engine oil change on the V…
Resetting the service light on the Volvo XC60.
Volvo Xc60 (2008-2016 / MK 1) Below we will see the procedure for resetting the service maintenance light for the oil change on the Volvo XC60, in simple and quick steps. First, w…

Other guides you may be interested in

Timing Belt Replacement on Audi Q5

The timing belt on the Audi Q5 has reached its mileage limit, so what should you do? Let's go through the removal of the belts on the Q5. Open and lift the hood of the engine, then remove the engine soundproofing panel. Once these steps are completed, remove the plastic covers of the belts located on the left side of the engine. Loosen the second tensioner and slide the belt out of its seat. After installing the new belt, use a wrench to install the tensioner pulley, and tighten it until the belt has the correct tension (install both belts). Reinstall the covering plastics. Start and test the Audi Q5 engine.

Watch the video!


by ScegliAuto

More videos