Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Volvo XC90?

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

Open the hood and loosen the bolts securing the right front wheel. Then, remove the corresponding wheel well liner and the side cover of the engine block to access the underlying timing belt.

Remove the timing belt by loosening the bolts that secure the tensioner pulley, reducing its tension, and sliding it off completely. At this point, insert the new timing belt into its designated location and check that everything functions correctly.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How and When to Replace the Timing Belt on the Volvo XC90
How and When to Replace the Timing Belt on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today, let's go over the procedure and instructions on how and when to remove and replace the timing belt on the Volvo XC90. For the diesel engine, t…
Replacement of the timing belt of the Volvo XC90
Replacement of the timing belt of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today's instructions will allow us to disassemble and replace the timing belt of the Volvo XC90. First, we open the hood of the vehicle and start by …
Guide to replacing the timing belt of the Volvo XC90 2.4L
Guide to replacing the timing belt of the Volvo XC90 2.4L
Volvo Xc90 (2002-2014 / MK 1) In this guide we will see the instructions for replacing the timing belt of the Volvo XC90 with a 2.4L engine; the manufacturer indicates that the ti…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos