Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Indicator on a Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Warning light – error code

In this very brief video guide today, we will see the procedure necessary to reset the service indicator on a Volvo XC60, a model produced from 2008 to 2016. Let's start by inserting the ignition key and pressing the "START" button to turn on the vehicle's injection system. Next, press and hold the "T1" button located on the speedometer, and also press the "START" button. While doing this, continue to hold both buttons until the orange "i" light on the speedometer starts flashing, then release the buttons and wait for the audible signal indicating that the reset has been completed.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2015 Volvo XC60
How to Reset the Service Light on a 2015 Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Even if you are not very familiar with this type of procedure on your 2015 Volvo XC60, you can complete the service light reset entirely on your own …
Resetting the Service Light on a Volvo XC60
Resetting the Service Light on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In today's tutorial video, you will see how to reset the service light on a Volvo XC60, first generation model produced from 2008 to 2016. Let's get …
Reset Service Light on Volvo XC60
Reset Service Light on Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In this video, you will see the steps to reset the service light for the regular oil change maintenance on a Volvo XC60 in simple steps. First, get i…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos