Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : How to reset the service light on the Volvo XC90.

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 2 - Years 2015-2024
Part: Instrument cluster
Operation: How to reset the service light on the Volvo XC90.

In today's video, we will see how to reset the service light in the Volvo XC90. This tutorial also applies to other models from the Swedish manufacturer equipped with the same multimedia system. First, we remind you to perform the maintenance recommended by the manufacturer and stated in the user manual. Once that is done, we can proceed with the operation at hand. Turn the knob on the central console and then proceed to start the vehicle. After a few seconds, the car will begin the operation and you can wait a few more seconds until it is completed, then finish everything.


Posted on 8 October 2023 by ScegliAuto



How do you reset the Service light on the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To reset the Service light on the Volvo XC90, you need to insert the ignition key into the ignition block so that it can be turned on. Once the dashb
How to reset the service light on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) If the maintenance message appears on the instrument panel of your first-generation Volvo XC90, even though the service has already been performed, d
How do you reset the Service light on a Volvo XC90?
Volvo Xc90 (2015-2024 / MK 2) The procedure for resetting the Service light on the Volvo XC90 is done by holding down the - button located on the left side of the steering wheel w

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos