Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V50
    4. : How to reset the maintenance light on a Volvo V50

Volvo V50 - Video tutorial

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Instrument cluster
Operation: How to reset the maintenance light on a Volvo V50

In this video, we can see how to reset the maintenance light of the Volvo V50. We can follow the instructions in the video, which can be summarized as follows: first, get into the car and close all the doors. Turn on the instrument panel to position 1 (partial ignition), without starting the engine. Press and hold the button at the bottom right of the odometer. Immediately turn the key to position II within four seconds (complete ignition of the instrument panel), while still holding the button. Wait for a yellow light to illuminate, then release the button. A beep will indicate that the reset has been successful.


Posted on 23 January 2024 by ScegliAuto

    Frequently Asked Questions

    • V50 2004-2012 - How do you reset the service light on Volvo V50? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos