Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : How do you replace the timing belt of the Volvo XC90?

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Timing belt
Operation: How do you replace the timing belt of the Volvo XC90?

In order to replace the timing belt of the Volvo XC90, you need to open the hood so that you can loosen the screws that secure the protective panel on the left side of the engine block; you will also need to remove the front right wheel and the corresponding inner fender. By doing so, you will have access to the belt tensioner pulley, which can be removed from its seat in order to reduce the tension of the belt and remove it from the pulleys; now you can insert the new replacement piece to ensure that everything works correctly.


Posted on 3 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Xc90 2015-2025 - How much does it cost to replace the timing belt of the Volvo XC90? Read Answer
    • Xc90 2002-2014 - How much does it cost to replace the timing belt on a Volvo XC90? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos