Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the engine oil indicator (service) on the Yamaha Majesty 400.

Model: Yamaha Majesty 400
Part: Service warning light

Video tutorial

These short and simple steps will show us how to reset the engine oil change indicator light (service) of the Yamaha Majesty 400 scooter. First, we put the scooter on the stand and start pressing the "all change" button; then we turn on the instrument panel by turning the key to position one, waiting for the engine oil change indicator light to flash until it completely resets from the instrument panel display, as shown in the video.

At this point, we turn off the instrument panel and start the engine, checking that the maintenance light has been reset correctly!


Posted on 23 May 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Yamaha Majesty 400
How to Reset the Oil Light on the Yamaha Majesty 400
Majesty 400 Manually resetting the engine oil light on your Yamaha Majesty 400 is very simple and takes just a few seconds. There is no need to consult your trus…
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
Majesty 400 If you notice the drive belt warning light on the dashboard of your Yamaha Majesty 400, do not worry because with the following guide you will be abl…
How to remove the engine block from the frame of the Yamaha Majesty 400.
How to remove the engine block from the frame of the Yamaha Majesty 400.
Majesty 400 Today we will discover the instructions that will allow us to disassemble and remove the engine from the frame of the Yamaha Majesty 400 scooter. Fir…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos