Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Yamaha Tracer 900?

Model: Yamaha Tracer 900
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Yamaha Tracer 900, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, then we place a container under the motorcycle, locate the drain hole bolt and unscrew it using a 17mm socket wrench.

We then let all the oil in the system drain out, unscrew the old filter, and tighten both the replacement and the bolt. At this point, all that's left to do is to pour in the required amount of oil through the designated top hole.


Posted on 3 July 2025 by ScegliAuto


Related tutorials

Replace the Engine Oil and Oil Filter on the Yamaha Tracer 900
Replace the Engine Oil and Oil Filter on the Yamaha Tracer 900
Tracer 900 Here are step-by-step instructions for performing routine maintenance on the Yamaha Tracer 900 by replacing the engine oil and oil filter. First, pla…
Where is the starter relay on a Yamaha MT09 Tracer 900?
Where is the starter relay on a Yamaha MT09 Tracer 900?
Tracer 900 In this video, you can see where the starter relay is located on a Yamaha MT09 Tracer 900 and how to proceed if you need to replace it. As shown, it …
How to remove the seat on the Yamaha Tracer 900?
How to remove the seat on the Yamaha Tracer 900?
Tracer 900 In this tutorial, you will see how to remove the seat on the Yamaha Tracer 900, a very simple and quick operation, for example, if you need to replac…

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!


by ScegliAuto

More videos