Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Engine Oil and Oil Filter on the Yamaha Tracer 900

Model: Yamaha Tracer 900
Part: Engine oil

Video tutorial

Here are step-by-step instructions for performing routine maintenance on the Yamaha Tracer 900 by replacing the engine oil and oil filter. First, place your bike on the centre stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the filter cartridge, replacing it with a new one, as shown in the video.

Finally, unscrew the filler cap and top up with new oil!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to replace the motor oil in the Yamaha Tracer 900?
How to replace the motor oil in the Yamaha Tracer 900?
Tracer 900 In this tutorial we can see how to replace the engine oil in the Yamaha Tracer 900, an extremely simple and quick operation. First of all, we wait fo…
How to Replace the Air Filter on a Yamaha Tracer 900?
How to Replace the Air Filter on a Yamaha Tracer 900?
Tracer 900 To replace the air filter on a Yamaha Tracer 900, loosen the bolts securing the fairing located just below the handlebars and above the fuel cap. You…
Where is the starter relay on a Yamaha MT09 Tracer 900?
Where is the starter relay on a Yamaha MT09 Tracer 900?
Tracer 900 In this video, you can see where the starter relay is located on a Yamaha MT09 Tracer 900 and how to proceed if you need to replace it. As shown, it …

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!


by ScegliAuto

More videos