Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the motor oil in the Yamaha V-Star 1100, an extremely simple and quick operation. First of all, make sure that the engine is cool enough, then position a container underneath the motorcycle, locate the drain plug and unscrew it using an 18mm socket wrench. Let all the oil in the system drain out, disconnect the indicated exhaust pipe, and open the filter housing. At this point, all that's left to do is insert the replacement, reassemble everything, and pour in the new oil through the designated hole.

Posted on 22 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Yamaha V-Star 1100?
How to replace the engine oil in the Yamaha V-Star 1100?
V Star 1100 .. how to replace the engine oil in the Yamaha V-Star 1100, a very simple and quick operation, to be carried out every 12 months. First of all, make sure.. …
How do you replace the clutch of the Yamaha V-Star 1100?
How do you replace the clutch of the Yamaha V-Star 1100?
V Star 1100 .. In order to replace the clutch of the Yamaha V-Star 1100, you need to loosen the screws that fasten the clutch cover, which is located on the right.. …
How to replace the front brake pads on the Yamaha V-Star 1100?
How to replace the front brake pads on the Yamaha V-Star 1100?
V Star 1100 .. to replace the front brake pads on the Yamaha V-Star 1100, an extremely simple and quick operation. First of all, position yourself in front of the brake.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos