Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Yamaha V-Star 1100?

Model: Yamaha V Star 1100
Part: Headlight bulb

Video tutorial

In this tutorial, you will see how to replace the front headlamp bulb on a Yamaha V-Star 1100, a very simple and quick operation. First, ensure that the key is not inserted, then, using a simple cross-head screwdriver, unscrew the screws located at the sides of the headlamp.

Next, separate the headlamp from the base, disconnect the power connector, and remove the rubber cap. At this point, you can release the metal clip, extract the bulb, and insert the replacement. To reassemble everything, simply follow the reverse procedure.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Yamaha V-Star 1100
How to Replace the Front Brake Pads on the Yamaha V-Star 1100
V Star 1100 .. to replace the front brake pads on the Yamaha V-Star 1100, a very simple and quick operation. First, position yourself in front of the brake in question,.. …
How to replace the air filter of the Yamaha V-Star 1100?
How to replace the air filter of the Yamaha V-Star 1100?
V Star 1100 .. To replace the air filter of the Yamaha V-Star 1100, you need to loosen the screws that secure the filter cover panel, located on the right side.. …
How to Replace the Front Brake Pads on a Yamaha V-Star 1100?
How to Replace the Front Brake Pads on a Yamaha V-Star 1100?
V Star 1100 .. To replace the front brake pads on a Yamaha V-Star 1100, loosen the screws that secure the brake caliper to its housing. Once these screws are loosened,.. …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos