Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Yamaha R6?

Model: Yamaha Yamaha R 6
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the motor oil in the Yamaha R6, an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then place the motorcycle on a stand and remove the lower left fairing.

Then disconnect the gear shift rod by loosening the upper bolt with a 10mm wrench, unscrew the drainage hole bolt with a 17mm wrench and let all the oil in the system drain out. At this point, all that's left to do is remove the old filter, tighten both the replacement and the bolt, reassemble everything and pour the necessary amount of oil through the appropriate hole.


Posted on 10 October 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Yamaha R6?
How to Change the Engine Oil in a Yamaha R6?
Yamaha R 6 In this tutorial, we will see how to change the engine oil in the Yamaha R6, a very simple and quick operation. First, ensure the engine is sufficien…
How to Change the Engine Oil on a Yamaha R6
How to Change the Engine Oil on a Yamaha R6
Yamaha R 6 Start by placing your Yamaha R6 on a central motorcycle stand, then start the engine and let it idle. After a couple of minutes, turn off the engine …
How do you replace the motor oil of the Yamaha R6?
How do you replace the motor oil of the Yamaha R6?
Yamaha R 6 It will be possible to replace the motor oil of the Yamaha R6 by loosening the screws that fasten the side panels of the motorcycle fairing: once the…

How to Reset the Service Light on a Honda PCX 150 Scooter

In this tutorial, you will see how to reset the service light on a Honda PCX 150 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the ignition. Keep the button pressed until the service light goes out, then restart the ignition to verify that the operation was successful.

Watch the video!


by ScegliAuto

More videos