Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the time on the Yamaha R6?

Model: Yamaha Yamaha R 6
Part: Clock

Video tutorial

In this tutorial, we will see how to adjust the time on the Yamaha R6, a very simple and quick operation to perform, for example, after disconnecting the battery or when switching to standard time or daylight saving time. First, insert the key, then turn on the instrument panel and press both the "SELECT" and "RESET" buttons, located on the dashboard, until the clock starts to flash.

Next, adjust the hour using the "RESET" button, switch to the minutes with the "SELECT" button, and similarly adjust the minutes before finally saving the setting.


Posted on 13 December 2025 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Yamaha R6?
How do you replace the exhaust pipe of the Yamaha R6?
Yamaha R 6 The replacement of the muffler installed on the Yamaha R6 can be carried out by loosening the screws that fix the exhaust terminal to its housing: on…
How to Change the Engine Oil on a Yamaha R6
How to Change the Engine Oil on a Yamaha R6
Yamaha R 6 Start by placing your Yamaha R6 on a central motorcycle stand, then start the engine and let it idle. After a couple of minutes, turn off the engine …
How do you disassemble the Yamaha R6 engine?
How do you disassemble the Yamaha R6 engine?
Yamaha R 6 In order to disassemble the engine of the Yamaha R6, you will need to loosen the screws that fix the engine block to its housing, which will be locat…

How to Reset the Service Light on a Honda PCX 150 Scooter

In this tutorial, you will see how to reset the service light on a Honda PCX 150 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the ignition. Keep the button pressed until the service light goes out, then restart the ignition to verify that the operation was successful.

Watch the video!


by ScegliAuto

More videos