Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Tw 200
Part: Battery

The battery replacement for the Yamaha TW 200 can be carried out by removing the screws that secure the device to its housing: these screws will be located at the bottom of the motorcycle's rear fender. Once the seat has been completely removed, it will be possible to detach it to access the underlying components: the battery will be in this position and can be released from its holder by loosening the screws and disconnecting the power cables. The new replacement part can then be inserted and properly secured, ensuring it functions correctly.

Posted on 15 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Yamaha TW 200?
How do you replace the battery of the Yamaha TW 200?
Tw 200 To replace the battery of the Yamaha TW 200, you need to loosen the screws that secure the device to its housing: to do this, you will also need to l…
How to Replace the Air Filter in a Yamaha TW 200
How to Replace the Air Filter in a Yamaha TW 200
Tw 200 In this tutorial, see how to replace the air filter in a Yamaha TW 200, a very simple and quick operation. First, wait for the engine to cool down su…
How to replace the motor oil in the Yamaha TW 200?
How to replace the motor oil in the Yamaha TW 200?
Tw 200 In this tutorial, we can see how to replace the motor oil in the Yamaha TW 200, a very simple and fast operation. First of all, make sure that the en…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos