Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front panel of the Yamaha X-Max 125

Model: Yamaha X Max
Part:

Video tutorial

To remove the front panel of the Yamaha X-Max 125, position yourself in front of the scooter and look for a small hole; use a bit to press and unlock the fastening mechanism. After unlocking it, pull outward to release the clips to remove the top part, then remove a screw with a 5 mm Allen key. Next, you will find two screws on the dashboard (one on each side) also with a 5 mm Allen key. Now take the front face and slide it down.

You will find two more screws (one on each side) to remove with a 10 mm socket. Open both compartments and remove two screws with a 5 mm Allen key. The side covers simply pull off to release them.

Underneath, you will find two clips: press the centre with a bit to unlock them. Access the headlight fairing by reaching inside and disconnecting the connector.

After removing all screws (including those around the headlight), disconnect the last connector and remove the entire front assembly.


Posted on 31 October 2026 by ScegliAuto


Related tutorials

How to raise and lower the windshield of the Yamaha X-MAX 125
How to raise and lower the windshield of the Yamaha X-MAX 125
X Max .. or lower the front windshield of the Yamaha X-MAX 125 scooter: we notice that on the transparent part there are two screws that we need to unscrew,.. …
How to change the time on the 2013 X Max 125
How to change the time on the 2013 X Max 125
X Max .. on the instrument panel of the 2013 Yamaha X Max 125. The procedure takes less than 1 minute to be completed and does not require any tools. To adjust.. …
How to reset the oil light on the X Max 300
How to reset the oil light on the X Max 300
X Max This video tutorial shows the procedure to reset the oil light on the Yamaha X Max. The procedure is very simple and quick. To perform this procedure…

How to Replace the Fairings on the Peugeot Kisbee

In this video tutorial, follow the main instructions to remove and replace the fairings on the Peugeot Kisbee scooter. First, place the scooter on the centre stand and lift the seat. Unscrew all the side screws of the fairings, also removing the number plate holder. Gently detach the fairings without breaking them, as shown in the video. Next, replace the rear fairings and then the front fairings in the same manner. Refit the fairings, ensuring that the clips and wiring are correctly positioned, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos