Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Belt on a Yamaha Majesty 400?

Model: Yamaha Majesty 400
Part:

Video tutorial

To replace the belt on the Yamaha Majesty 400, first loosen the bolts securing the cover containing the air filter and remove it. Now, you will be able to access the cover containing the transmission and loosen its bolts to open the cover. Once opened, you can loosen the nuts securing the central pins of the variator and the clutch bell.

By removing both, you can slide the belt out of its housing and replace it with a new spare part. After installing the belt, variator, and clutch, reinstall both covers removed earlier and the air filter.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Belt on the Yamaha Majesty 400?
How to Replace the Belt on the Yamaha Majesty 400?
Majesty 400 To replace the belt on the Yamaha Majesty 400, start by loosening the screws that secure the cover positioned on the left side of the bike, near the …
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
Majesty 400 If you notice the drive belt warning light on the dashboard of your Yamaha Majesty 400, do not worry because with the following guide you will be abl…
How to reset the V-Belt warning light on the Yamaha Majesty 400 scooter?
How to reset the V-Belt warning light on the Yamaha Majesty 400 scooter?
Majesty 400 In this tutorial we can see how to reset the V-Belt warning light on the Yamaha Majesty 400 scooter, an extremely simple and quick operation, to be c…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos