Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight on a Yamaha Majesty 400

Model: Yamaha Majesty 400
Part: Headlight

This video is currently unavailable

As shown in the video, remove the screws that secure the cover above the front headlight and take it off. Then, unscrew all the screws that were underneath this cover and are now accessible, and remove the windscreen, followed by the remaining front plastics.

At this point, you will have freed additional screws to remove for disassembling the headlight.

Also, unscrew the screws beneath the front of the scooter, as clearly shown in the video. Remove the side front plastics from the rider's side and detach the fairing containing the headlight, which you can then disassemble by unscrewing it from behind.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Yamaha Majesty 500
How to Replace the Headlight Bulb on a Yamaha Majesty 500
Majesty 400 Before you can start, position your Yamaha Majesty 400 on the centre stand. Begin by turning the handlebars to the left. Next, unclip and remove the …
How to replace the battery of the Yamaha Majesty 400
How to replace the battery of the Yamaha Majesty 400
Majesty 400 In a few simple steps, we will see how to disassemble and replace the battery of the Yamaha Majesty 400. First, lift the seat and start unscrewing th…
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
How to Reset the Drive Belt Warning Light on the Yamaha Majesty 400
Majesty 400 If you notice the drive belt warning light on the dashboard of your Yamaha Majesty 400, do not worry because with the following guide you will be abl…

How to change the engine oil on the Aprilia Shiver 900?

To change the engine oil on the Aprilia Shiver 900, loosen the screws that secure the engine guard located at the bottom of the vehicle: once the screws are loosened, you can detach it and locate the drain plug of the oil sump. By removing this plug, you can collect all the used oil in a suitably placed container; at this point, allow all the oil to drain and remove the filter located at the bottom of the bike. Once the filter is replaced, top up the oil through the breather located on the right side of the bike.

Watch the video!


by ScegliAuto

More videos