Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Drive Belt on a Yamaha T-Max

Model: Yamaha T Max
Part:

Video tutorial

Before you start, position your Yamaha T-Max on the centre stand. Begin by removing the right side fairings by unscrewing the securing screws.

Next, unscrew the bolts that secure the cover over the drive belt. This will give you access to the drive belt itself.

Proceed to unscrew and remove the bolts that secure the flywheel and the belt rollers. At this point, remove the belt itself, and you will have successfully completed the disassembly.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

T Max Today's main instructions will show you how to remove and replace the transmission chain tensioner on the Yamaha T-Max scooter. First, place the scoo…
T Max In this video, we see how to disassemble the variator belt on the Yamaha T-MAX: we remove the variator with the specific key, inserting the pins into…
T Max This guide outlines the main steps to remove and replace the front headlamp bulb on a Yamaha T-max 500 scooter. You do not need to remove the front f…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to replace the exhaust on a Keeway RKF 125?

To replace the exhaust on the Keeway RKF 125, loosen the screws that secure it at the lower support near the footpeg and at the rear mudguard of the bike. Once these two screws are removed, you can then loosen the two screws that secure the clamp to the exhaust pipe at the front of the bike. This way, the old exhaust can be completely removed from its position, allowing you to replace it with a new spare part; after installation, ensure that everything functions correctly.

Watch the video!


by ScegliAuto

More videos