Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Yamaha Xmax 400?

Model: Yamaha Xmax 400
Part: Brake pads

Video tutorial

To replace the front brake pads on a Yamaha Xmax 400, you will need a 15 mm socket, a 10 mm T-bar, a 5 mm hex key, a screwdriver, a brush, thread lock, and of course, new brake pads. Mark the positions of the pins with a marker and remove the hex key and the pin shown in the video.

Then, use the socket to remove the caliper support pins. By pushing the caliper pistons back, you will create space to insert the new pads.

At this point, reassemble all the previously removed parts in reverse order.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulbs on a Yamaha Xmax 400?
How to Replace the Dipped Beam Bulbs on a Yamaha Xmax 400?
Xmax 400 A simple way to replace the front bulbs on a maxi-scooter like the Yamaha Xmax 400 is to reach under the front shield and work "blindly". However, th…
How to Reset the V-Belt Warning Light on a Yamaha Xmax 400?
How to Reset the V-Belt Warning Light on a Yamaha Xmax 400?
Xmax 400 To reset the V-Belt warning light on the Yamaha Xmax 400, insert the key into the ignition switch and turn it to power on the dashboard. To reset the…
Reset the belt change warning for the Yamaha Xmax 400.
Reset the belt change warning for the Yamaha Xmax 400.
Xmax 400 Following the instructions in this guide, we will see how to reset the warning for the replacement of the transmission belt of the Yamaha Xmax 400 sc…

How to Replace the Shaft Seals on the GasGas EC 125?

To replace the shaft seals on the GasGas EC 125, loosen the nut that secures the sprocket, located on the left side of the bike. Once the sprocket is removed, moving the chain as well, you can locate the shaft seals positioned at the bottom of the sprocket. Using a tool like a screwdriver, pry out the old seals from their housing and replace them with new spare parts. After replacement, reinstall the sprocket and the corresponding chain, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos