Do it yourself
Frequently asked questions about cars and motorcycles
The operation of resetting the V-Belt light on the Yamaha Xmax 400 involves inserting the key into the ignition block, turning it to turn on the dashboard. To reset the light, you will need to pull the lever located at the base of the right handlebar towards the inside. While holding the lever, the light will start flashing until the remaining kilometers until the next replacement are reset. Once the kilometers have been reset, you can release the lever and turn off the dashboard by turning the key in the opposite direction.

Posted on 16 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Xmax 400 Following the instructions in this guide, we will see how to reset the warning for the replacement of the transmission belt of the Yamaha Xmax 400 sc…
Xmax 400 If the V-Belt warning light is illuminated on the dashboard of your Yamaha XMAX 400 scooter, it means it is time to replace the drive belt as it has …
Xmax 400 In this tutorial, we can see how to reset the belt service on the Yamaha XMAX 400 scooter, an extremely simple and quick operation. This service is i…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos