Do it yourself
Frequently asked questions about cars and motorcycles
This tutorial shows how to reset the V-BELT light on a Yamaha X-Max 400 scooter, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, which involves replacing the drive belt. Start by removing the right panel located just below the handlebars, then locate the indicated white connector, which may be deep inside. Next, turn on the ignition, disconnect the connector for about 5 seconds, and reconnect it. Restart the ignition and check that the operation was successful.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Xmax 400 The operation of resetting the V-Belt light on the Yamaha Xmax 400 involves inserting the key into the ignition block, turning it to turn on the dash…
Xmax 400 In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation.…
Xmax 400 .. see how to reset the belt service on the Yamaha XMAX 400 scooter, an extremely simple and quick operation. This service is indicated by the "V-Belt" light... …

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos