Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

Model: Yamaha Xmax 400
Part: Warning light – error code

Video tutorial

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt.

Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Reset the V-BELT Light on a Yamaha X-Max 400 Scooter?
How to Reset the V-BELT Light on a Yamaha X-Max 400 Scooter?
Xmax 400 .. how to reset the V-BELT light on a Yamaha X-Max 400 scooter, a very simple and quick operation. Before doing this, ensure you have completed the.. …
What Does the V-Belt Warning Light Indicate on the Yamaha XMAX 400 Scooter and How to Remove It?
What Does the V-Belt Warning Light Indicate on the Yamaha XMAX 400 Scooter and How to Remove It?
Xmax 400 .. is illuminated on the dashboard of your Yamaha XMAX 400 scooter, it means it is time to replace the drive belt as it has reached the service interval... …
Reset the belt change warning for the Yamaha Xmax 400.
Reset the belt change warning for the Yamaha Xmax 400.
Xmax 400 .. of the transmission belt of the Yamaha Xmax 400 scooter. First of all, we put the scooter on the central stand and turn the key to the on position;.. …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos