Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the indicator fuse on the Yamaha Tracer, start by removing the right front panel by unscrewing the 3 Allen screws. Give the panel a slight shake to position it nearby, locate the fuse box, open the right box from the top, and using pliers, remove the fuse to be replaced (the fuse with the broken bridge inside). Take a new one of the same amperage (in the video, the new fuse is taken from another box of spare fuses located behind the battery), insert it in place of the fuse to be replaced, and check by activating the 4 indicators, both right and left. If both work, refit the right front panel by slotting it in and screwing the 3 Allen screws back in.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time on a Yamaha Tracer 900
Tracer 900 If the display on your Yamaha Tracer 900 shows a different time than the correct one and you want to change it manually, simply read the following gu…
How to Set the Clock on the Yamaha Tracer 900
How to Set the Clock on the Yamaha Tracer 900
Tracer 900 Follow these instructions to set the clock on the display of the instrument cluster of the Yamaha Tracer 900, as well as the MT-09. First, place the …
Replacing the Rear Tyre on the Yamaha Tracer 900
Replacing the Rear Tyre on the Yamaha Tracer 900
Tracer 900 This guide outlines the main steps to remove and replace the rear wheel and tyre of the Yamaha Tracer 900 motorcycle. First, place the bike on its ce…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos