Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to reset the service on a Yamaha YZF R3, a very simple and quick operation to perform only after completing the required scheduled maintenance. Start by inserting the key and turning on the instrument cluster, then scroll through the various mileages on the display by repeatedly pressing the lower left button. Once you reach the "OIL" option and its respective interval, hold down the upper button until it is correctly reset. Restart the instrument cluster and check that the reset was successful.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Yamaha YZF-R3?
How to Reset the Service Light on a Yamaha YZF-R3?
Yzf R3 In this tutorial, we will see how to reset the service light on a Yamaha YZF-R3, an extremely simple and quick operation to perform only after comple…
How to replace the fuel cap of the Yamaha YZF R3
Yzf R3 Briefly, we will see the step-by-step instructions that will allow us to disassemble and replace the fuel tank cap of the Yamaha YZF R3 motorcycle. F…
How do you replace the front brake pads of the Yamaha YZF-R3?
How do you replace the front brake pads of the Yamaha YZF-R3?
Yzf R3 In order to replace the front brake pads of the Yamaha YZF-R3, you need to loosen the screws that hold the brake caliper to its housing: this will be…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos