Do it yourself
| ||||
|
Acura Rlx - -board computer
Acura Rlx (2014-2020 / KC2, KC1)
To reset the oil light on the 2020 Acura RLX. In this new mini guide of ours, we will discover together how to perform the manual reset of the oil light on your 2020 Acura RLX. First, you need to start the …read all… Posted on 5 August 2023 by ScegliAuto
Acura Rlx (2014-2020 / KC2, KC1)
How to set the time of the 2014 Acura RLX In the following guide dedicated to owners of the 2014 Acura RLX we will find out how to manually set the time. First you obviously have to go inside the car …read all… Posted on 29 April 2023 by ScegliAuto
Acura Rlx (2014-2020 / KC2, KC1)
How to reset the service system on the Acura Rlx When you are faced with a problem resetting your Acura Rlx do not despair. Just follow the instructions you find in this video. To begin, turn on the …read all… Posted on 23 April 2023 by ScegliAuto
Acura Rlx (2014-2020 / KC2, KC1)
How to reset the service light on the Acura RLX To reset the service indicator on your Acura RLX, you just need to perform a few quick and easy steps described below. First turn on the instrument panel and …read all… Posted on 26 April 2024 by ScegliAuto Air conditioning (1) Car stereo (1) Battery (1) Key (6) -board computer (4) Checks and maintenance (2) Dashboard (1) Cabin air filter (1) Headlight bulb (1) Starter motor (1) Engine oil (1) Door panel (1) Brake pads (1) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |