Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 156
  6. : Dashboard

Alfa Romeo 156 - Dashboard

Alfa Romeo 156 (1997-2007 / MK 1)
How to disassemble the central console on Alfa Romeo 156

To disassemble the central console on an Alfa Romeo 156, here is a general guide that could help you. Remove the radio: to do this, you may need special tools …read all…
Posted on 16 May 2024 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
Where is the OBD port of the Alfa Romeo 156 located?

In this new mini guide dedicated to your Alfa Romeo 156, we will discover where the OBD port is located so that you can finally use it to connect any …read all…
Posted on 20 October 2023 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
How to disassemble the central instrumentation of the Alfa Romeo 156

In this video we will see how to disassemble the central instrumentation and the various gauge displays of the Alfa Romeo 156, in simple steps. First we get on …read all…
Posted on 20 November 2022 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
How to replace the dashboard of the Alfa Romeo 156

In this process it will be necessary to follow the video backwards for an easier understanding, in fact the video will only concern the assembly of the …read all…
Posted on 28 September 2023 by ScegliAuto

Airbags (1) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Air Vents (1) Spark plugs (1) Glow plugs (2) Bodywork (2) Key (1) Timing belt (7) V-belt (1) -board computer (1) Checks and maintenance (5) Dashboard (4) Bearing (1) Air filter (1) Cabin air filter (6) Diesel filter (1) Clutch (3) Injectors (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Dashboard light (4) Third brake light (1) Gear oil (3) Door panel (6) Front bumper (5) Rear bumper (1) Brake pads (6) Hydraulic pistons (1) Gear Shift Knob (3) Pump (2) Fuel pump (3) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (5) Drive shaft (1) Lambda sensor (2) Outside rearview mirror (3) Manufacturer's coat of arms (2) Thermostat (1) Turbine (2) EGR valve (1) Interior blower (1) Side window (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos