Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Blower motor

Alfa Romeo 156 - Blower motor

Blower Motor Alfa Romeo 156 (1997-2007 / mk 1)

Alfa Romeo 156 (1997-2007 / MK 1)
How to Replace the Heater Fan on an Alfa Romeo 156
Before you start, open the front passenger door of your Alfa Romeo 156. Begin by removing the lower cover of the glove compartment by unscrewing the relevant …Read all…
Posted on 20 May 2026 by ScegliAuto
Airbag (1) Speaker (1) Shocks (1) Car stereo (5) Air vents (1) Spark plugs (1) Glow plugs (2) Body (3) Key (1) Timing belt (7) V-belt (1) Checks and maintenance (2) Dashboard (4) Bearing (1) Rear bench seat (1) Headlight (1) Air filter (1) Cabin air filter (6) Diesel fuel filter (1) Clutch (3) Fuel injectors (1) Light bulb (2) Headlight bulb (4) Tail light bulb (1) Interior dome light bulb (1) Antifreeze coolant (1) Instrument panel light (4) (1) Handle (1) Transmission fluid (3) Engine oil (1) Power steering fluid (1) Clock (1) Door trim panel (6) Front bumper (5) Rear bumper (1) Brake pads (6) Shift knob (3) Pump (2) Fuel pump (4) Power window switch (1) Radiator (2) Heater core (1) Fuse box (4) Seat (5) Axle shaft (1) Oxygen sensor (2) Side mirror (3) Warning light – error code (1) Service warning light (5) Manufacturer emblem (2) Thermostat (1) Turbocharger (2) EGR valve (1) Blower motor (1) Side window (1) Steering wheel (2)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos