Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Clutch

Alfa Romeo 156 - Clutch

Alfa Romeo 156 (1997-2007 / MK 1)
How do you replace the clutch of an Alfa Romeo 156?
In order to replace the clutch of the Alfa Romeo 156, you need to remove the front wheels and the inner covers of the respective wheel arches, so that you have …read all…
Posted on 20 April 2023 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
How to replace the clutch pedal sensor on an Alfa Romeo 156
Before we can start, we will have to open the driver's door of our Alfa Romeo 156. Let's start by disassembling and removing the cover positioned behind the …read all…
Posted on 6 February 2024 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
How to bleed the Alfa Romeo 156 clutch circuit
If pressing the clutch pedal you notice that it tends to discharge and does not oppose the right resistance, then it is likely that there may be air in the …read all…
Posted on 23 September 2023 by ScegliAuto
Airbags (1) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Air Vents (1) Spark plugs (1) Glow plugs (2) Bodywork (2) Key (1) Timing belt (7) V-belt (1) -board computer (1) Checks and maintenance (5) Dashboard (4) Bearing (1) Air filter (1) Cabin air filter (6) Diesel filter (1) Clutch (3) Injectors (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Dashboard light (4) Third brake light (1) Gear oil (3) Door panel (6) Front bumper (5) Rear bumper (1) Brake pads (6) Hydraulic pistons (1) Gear Shift Knob (3) Pump (2) Fuel pump (3) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (5) Drive shaft (1) Lambda sensor (2) Outside rearview mirror (3) Manufacturer's coat of arms (2) Thermostat (1) Turbine (2) EGR valve (1) Interior blower (1) Side window (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos