Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Front bumper

Alfa Romeo 156 - Front bumper

Alfa Romeo 156 (1997-2007 / MK 1)
How to remove the front bumper in the Alfa Romeo 156?
In this tutorial we can see how to remove the front bumper in the Alfa Romeo 156, a very simple operation. First of all we open the bonnet, after which we …read all…
Posted on 22 October 2022 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
Removing the Alfa Romeo 156 bumper
In this video tutorial we will see how to remove the front bumper of an Alfa Romeo 156. Let's start by opening the bonnet of the car: with a screwdriver we go …read all…
Posted on 23 December 2023 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
Remove Alfa 156 bumper
Remove the front bumper of the Alfa 156? We disassemble the bumper and all its parts from the front of the car. Let's lift the bonnet and put it in safety. We …read all…
Posted on 18 December 2023 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
Disassembly of the front bumper of an Alfa 156
Is the bumper of the Alfa Romeo 156 damaged and cannot be repaired? Let's see how the car is removed from above. We open the front hood; we remove the front …read all…
Posted on 8 December 2023 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
How to replace the front bumper on Alfa Romeo 156
As a first step, unhook the hood from the special lever and then lift it to hold it with the special rod. Now you can start unscrewing the various screws that …read all…
Posted on 30 September 2023 by ScegliAuto
Airbags (1) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Air Vents (1) Spark plugs (1) Glow plugs (2) Bodywork (2) Key (1) Timing belt (7) V-belt (1) -board computer (1) Checks and maintenance (5) Dashboard (4) Bearing (1) Air filter (1) Cabin air filter (6) Diesel filter (1) Clutch (3) Injectors (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Dashboard light (4) Third brake light (1) Gear oil (3) Door panel (6) Front bumper (5) Rear bumper (1) Brake pads (6) Hydraulic pistons (1) Gear Shift Knob (3) Pump (2) Fuel pump (3) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (5) Drive shaft (1) Lambda sensor (2) Outside rearview mirror (3) Manufacturer's coat of arms (2) Thermostat (1) Turbine (2) EGR valve (1) Interior blower (1) Side window (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos