Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : EGR valve

Alfa Romeo 156 - EGR valve

EGR Valve Alfa Romeo 156 (1997-2007 / mk 1)

Alfa Romeo 156 (1997-2007 / MK 1)
Removing the EGR Valve on Alfa Romeo 146 1.9
In this guide, you will learn how to remove and clean the EGR valve on an Alfa Romeo 156. First, open the bonnet and remove the protective cover held by three …Read all…
Posted on 13 April 2026 by ScegliAuto
Airbag (1) Speaker (1) Shocks (1) Car stereo (5) Air vents (1) Spark plugs (1) Glow plugs (2) Body (3) Key (1) Timing belt (7) V-belt (1) Checks and maintenance (2) Dashboard (4) Bearing (1) Rear bench seat (1) Headlight (1) Air filter (1) Cabin air filter (6) Diesel fuel filter (1) Clutch (3) Fuel injectors (1) Light bulb (2) Headlight bulb (4) Tail light bulb (1) Interior dome light bulb (1) Antifreeze coolant (1) Instrument panel light (4) (1) Handle (1) Transmission fluid (3) Engine oil (1) Power steering fluid (1) Clock (1) Door trim panel (6) Front bumper (5) Rear bumper (1) Brake pads (6) Shift knob (3) Pump (2) Fuel pump (4) Power window switch (1) Radiator (2) Heater core (1) Fuse box (4) Seat (5) Axle shaft (1) Oxygen sensor (2) Side mirror (3) Warning light – error code (1) Service warning light (5) Manufacturer emblem (2) Thermostat (1) Turbocharger (2) EGR valve (1) Blower motor (1) Side window (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos