Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Gear Shift Knob

Alfa Romeo 156 - Gear Shift Knob

Alfa Romeo 156 (1997-2007 / MK 1)
How do you replace the gear knob on the Alfa Romeo 156?
In order to replace the gear knob of the Alfa Romeo 156 you have to unscrew the knob so that it is removed from the final part of the lever, giving access to …read all…
Posted on 3 August 2022 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
How to remove the gear knob and the steering wheel of the Alfa Romeo 156
In this video tutorial we will see how to remove the gear knob and our steering wheel on the Alfa Romeo 156, in simple steps; in this case we will deal with …read all…
Posted on 20 June 2022 by ScegliAuto
Alfa Romeo 156 (1997-2007 / MK 1)
How to remove the knob of an Alfa Romeo 156
Do you want to replace the gear knob on your Alfa Romeo 156? Let's see how to do it in this video. Remove the frame of the leather cap with a plastic lever; …read all…
Posted on 22 November 2023 by ScegliAuto
Airbags (1) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Air Vents (1) Spark plugs (1) Glow plugs (2) Bodywork (2) Key (1) Timing belt (7) V-belt (1) -board computer (1) Checks and maintenance (5) Dashboard (4) Bearing (1) Air filter (1) Cabin air filter (6) Diesel filter (1) Clutch (3) Injectors (1) Light bulb (2) Headlight bulb (4) Rear light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (1) Dashboard light (4) Third brake light (1) Gear oil (3) Door panel (6) Front bumper (5) Rear bumper (1) Brake pads (6) Hydraulic pistons (1) Gear Shift Knob (3) Pump (2) Fuel pump (3) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (5) Drive shaft (1) Lambda sensor (2) Outside rearview mirror (3) Manufacturer's coat of arms (2) Thermostat (1) Turbine (2) EGR valve (1) Interior blower (1) Side window (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos