Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How to disassemble the central instrumentation of the Alfa Romeo 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Dashboard
Operation: How to disassemble the central instrumentation of the Alfa Romeo 156

In this video we will see how to disassemble the central instrumentation and the various gauge displays of the Alfa Romeo 156, in simple steps. First we get on board the car and start by removing our car radio, disconnecting the electrical connectors located on the back; then we unscrew the instrumentation fixing screws, which we find on the sides, as shown in the video. At this point we remove the lower part of the instrumentation, disconnecting all the electric cables; we remove the central cover by levering on the sides, removing all the various wiring located on the back!


Posted on 20 November 2022 by ScegliAuto



How to disassemble the central console on Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) To disassemble the central console on an Alfa Romeo 156, here is a general guide that could help you. Remove the radio: to do this, you may need spec
How to repair the turbine of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Do you want to give your car turbine a new lease of life but it seems complicated to you? Let's see in this video how to regenerate the turbine of an
How to replace the coolant reservoir on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This procedure is only to be carried out with the engine off. Let's start by opening the front hood of our Alfa Romeo 156. After that, we will have t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos