Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : Airbag

Alfa Romeo 159 - Airbag

Airbag Alfa Romeo 159 (2005-2011 / mk 1)

Alfa Romeo 159 (2005-2011 / MK 1)
Removing the Airbag and Steering Wheel of the Alfa Romeo 159
This guide shows you the procedure to remove and replace the steering wheel airbag and steering wheel of the Alfa Romeo 159. First, get into the vehicle and …Read all…
Posted on 6 August 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Alternator (3) Shocks (1) Car stereo (8) Battery (1) Air vents (2) Control arm (2) Spark plugs (2) Body (2) Key (6) Timing belt (8) Onboard computer (1) Checks and maintenance (6) Dashboard (6) Bearing (1) MAF sensor (1) Brake rotors (2) Rear bench seat (1) Headlight (2) Tail light (2) Fog lights (7) Air filter (4) Cabin air filter (5) Diesel fuel filter (6) Oil filter (5) Clutch (5) Grille (1) Window switch (1) Light bulb (4) Headlight bulb (9) Tail light bulb (1) Interior dome light bulb (3) Instrument panel light (1) License plate light (1) Handle (2) Power window motor (1) Starter motor (1) Transmission fluid (1) Engine oil (5) Clock (5) Door trim panel (8) Front bumper (3) Rear bumper (2) Shift knob (7) Fuel pump (1) Instrument cluster (3) Fuse box (10) Seat (3) Crankshaft position sensor (2) Door lock (2) Side mirror (3) Warning light – error code (3) Service warning light (17) Fuel cap (1) Windshield wipers (1) Thermostat (3) Center console tunnel (1) Turbocharger (2) Blower motor (2) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos