Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : Door trim panel

Alfa Romeo 159 - Door trim panel

Door Trim Panel Alfa Romeo 159 (2005-2011 / mk 1)

Alfa Romeo 159 (2005-2011 / MK 1)
How to Remove the Door Panel and Window Mechanism on the Alfa Romeo 159
This guide provides the main instructions to remove and replace the door panel and window mechanism on the Alfa Romeo 159. First, open the driver's side front …Read all…
Posted on 17 August 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
How to Remove the Rear Door Panel of the Alfa Romeo 159?
To remove the door panel of the Alfa Romeo 159, unscrew the screws that secure it: the first is located in the internal handle recess, just below its …Read all…
Posted on 16 July 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
How to Remove the Door Panel of the Alfa Romeo 159?
To replace the door panel of the Alfa Romeo 159, loosen the screw located in the handle recess of the door. Once this is removed, detach the cover near the …Read all…
Posted on 12 September 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
How to Remove the Rear Door Panel on the Alfa Romeo 159
In this video tutorial, learn how to remove the rear door panel and window mechanism on the Alfa Romeo 159 in simple steps. First, open the rear door and start …Read all…
Posted on 10 June 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
Removing Door Panel from Alfa Romeo 159
In this video tutorial, you will learn how to remove the rear door panel of an Alfa Romeo 159. First, open the door and remove the screw cover found in the …Read all…
Posted on 28 April 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
How to Dismantle the Door Panel on Alfa Romeo 159
How do you dismantle the door panel (driver's side) on an Alfa Romeo 159? In this guide, you will see how to proceed. Before starting the dismantling process, …Read all…
Posted on 19 March 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
How to Remove the Door Panel on Alfa Romeo 159
How to remove the door panel (passenger side) of an Alfa Romeo 159? Follow these steps: before starting the disassembly, disconnect the battery terminals …Read all…
Posted on 18 March 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
How to Remove the Door Panel on an Alfa Romeo 159
How to remove the door panel on an Alfa Romeo 159? In this video, learn how to proceed: before starting the disassembly work, disconnect the battery terminals …Read all…
Posted on 17 March 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Alternator (3) Shocks (1) Car stereo (8) Battery (1) Air vents (2) Control arm (2) Spark plugs (2) Body (2) Key (6) Timing belt (8) Onboard computer (1) Checks and maintenance (6) Dashboard (6) Bearing (1) MAF sensor (1) Brake rotors (2) Rear bench seat (1) Headlight (2) Tail light (2) Fog lights (7) Air filter (4) Cabin air filter (5) Diesel fuel filter (6) Oil filter (5) Clutch (5) Grille (1) Window switch (1) Light bulb (4) Headlight bulb (9) Tail light bulb (1) Interior dome light bulb (3) Instrument panel light (1) License plate light (1) Handle (2) Power window motor (1) Starter motor (1) Transmission fluid (1) Engine oil (5) Clock (5) Door trim panel (8) Front bumper (3) Rear bumper (2) Shift knob (7) Fuel pump (1) Instrument cluster (3) Fuse box (10) Seat (3) Crankshaft position sensor (2) Door lock (2) Side mirror (3) Warning light – error code (3) Service warning light (17) Fuel cap (1) Windshield wipers (1) Thermostat (3) Center console tunnel (1) Turbocharger (2) Blower motor (2) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos