Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 159
  6. : Turbocharger

Alfa Romeo 159 - Turbocharger

Turbocharger Alfa Romeo 159 (2005-2011 / mk 1)

Alfa Romeo 159 (2005-2011 / MK 1)
How to replace the turbine of the Alfa Romeo 159 2.4 JTD

This short guide will show us the main steps on how to disassemble and replace the turbocharger on the Alfa Romeo 159 2.4 JTD. First of all, we open the engine …Read all…
Posted on 21 July 2025 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
Instructions for Removing the Turbocharger on Alfa Romeo 159 1.9 JTDM

In this video tutorial, we will see the main instructions on how to remove the turbo or turbocharger on an Alfa Romeo 159 with a 1.9 JTDM 16-valve engine. …Read all…
Posted on 16 May 2026 by ScegliAuto

Cigarette lighter (1) Airbag (1) Alternator (3) Shocks (1) Car stereo (8) Battery (3) Air vents (2) Control arm (2) Spark plugs (2) Body (2) Key (6) Timing belt (8) Onboard computer (1) Checks and maintenance (6) Dashboard (6) Bearing (1) MAF sensor (1) Brake rotors (2) Rear bench seat (1) Headlight (2) Tail light (2) Fog lights (7) Air filter (4) Cabin air filter (5) Diesel fuel filter (6) Oil filter (5) Clutch (5) Grille (1) Window switch (1) Light bulb (4) Headlight bulb (9) Tail light bulb (1) Interior dome light bulb (3) Instrument panel light (1) License plate light (1) Handle (2) Power window motor (1) Starter motor (1) Transmission fluid (1) Engine oil (5) Clock (5) Door trim panel (8) Front bumper (3) Rear bumper (2) Shift knob (7) Fuel pump (1) Instrument cluster (3) Fuse box (10) Seat (3) Crankshaft position sensor (2) Door lock (2) Side mirror (3) Warning light – error code (3) Service warning light (17) Fuel cap (1) Windshield wipers (1) Thermostat (3) Center console tunnel (1) Turbocharger (2) Blower motor (2) Steering wheel (3)

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos