Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : Turbocharger removal instructions on Alfa Romeo 159 1.9 JTDM

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Turbine
Operation: Turbocharger removal instructions on Alfa Romeo 159 1.9 JTDM

In this video tutorial we will see the main instructions on how to disassemble the turbine or turbocharger on an Alfa Romeo 159 with a 1.9 JTDM 16 valve engine. First we open the bonnet of our car and we go to remove the intake sleeve; then we remove the exhaust manifold connected to our turbine, unscrewing the bolts from under the car, as shown in the video. At this point we disconnect the upper bolts of the turbo and disconnect the various sleeves to be able to remove it; so let's go to the revision of the same or we go directly to replace it!


Posted on 26 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 159 2005-2011 - How much does it cost to replace the turbine in the Alfa Romeo 159? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos