Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : Outside rearview mirror

Alfa Romeo 159 - Outside rearview mirror

Alfa Romeo 159 (2005-2011 / MK 1)
How to remove the exterior rearview mirror of the Alfa Romeo 159
In this video tutorial we will see how to remove and replace the exterior rearview mirror of the Alfa Romeo 159, in simple and quick steps. First we open the …read all…
Posted on 13 April 2024 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
Remove rear view mirror of an Alfa Romeo 159
Is the car mirror damaged? Let's see how to remove the piece from the mirror seat. With a plastic or rubber lever, we go to pry between the perimeter of the …read all…
Posted on 30 November 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (2) Alternator (1) Shock absorbers (1) Car stereo (8) Battery (2) Air Vents (2) Arm (2) Spark plugs (1) Key (4) Locking the trunk (1) Timing belt (6) -board computer (6) Checks and maintenance (13) Dashboard (5) Bearing (1) Mass air flow sensor (1) Brake discs (2) Headlight (1) Tail light (2) Fog lights (6) Air filter (4) Cabin air filter (4) Diesel filter (6) Oil filter (4) Clutch (4) Window lift switch (1) Accessory Kit (1) Light bulb (4) Headlight bulb (8) Rear light bulb (1) Interior lights ceiling light bulb (3) License plate light (1) Handle (2) Window motor (1) Starter motor (1) Gear oil (1) Engine oil (5) Door panel (8) Front bumper (3) Rear bumper (2) Gear Shift Knob (7) Instrument cluster (6) Fuse box (5) Seat (3) Crankshaft RPM sensor (1) Lock (2) Outside rearview mirror (2) Windscreen wipers (1) Thermostat (2) Central tunnel (1) Turbine (1) Interior blower (2) Steering wheel (3)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos