Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the external rearview mirror of the Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Side mirror

Following the instructions in this guide, we will see how to disassemble and replace the external rearview mirror of the Alfa Romeo 159. First, we open the front door of the car and start disassembling and removing the door panel; to do this, we unscrew the fixing screws located on it and remove the window switch panel, then disconnect the connector underneath, as shown in the video. At this point, we remove the triangular plastic cover to unscrew the mirror screws, disconnecting the electrical connector for adjustment to remove it; then we replace it with the new one!

Posted on 24 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Wing Mirror on an Alfa Romeo 159
Removing the Wing Mirror on an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Is the car mirror damaged? Here’s how to remove the piece from the mirror housing. Use a plastic or rubber trim tool to pry between the edge of the m…
How to Remove the Rear Light of an Alfa Romeo 159
How to Remove the Rear Light of an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Before you can start, open the tailgate of the boot on your Alfa Romeo 159. Begin by moving the carpet that covers the fixing nuts of the rear light.…
How to Remove the Starter Motor from an Alfa Romeo 159?
How to Remove the Starter Motor from an Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) Before you can begin, open the bonnet of your Alfa Romeo 159. Start by removing the hoses and collectors located above the starter motor by unscrewin…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos