Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : Spark plugs

Alfa Romeo 159 - Spark plugs

Spark Plugs Alfa Romeo 159 (2005-2011 / mk 1)

Alfa Romeo 159 (2005-2011 / MK 1)
How to Change the Spark Plugs on an Alfa Romeo 159
Here’s how to change the spark plugs on an Alfa Romeo 159: Remove the 4 screws holding the engine cover, disconnect the electrical connector from each coil, …Read all…
Posted on 5 July 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
How to Replace Spark Plugs on Alfa Romeo 159?
To replace the spark plugs on the Alfa Romeo 159, open the bonnet and loosen the bolts securing the cover on top of the engine. Under the cover, there will be …Read all…
Posted on 6 June 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Alternator (3) Shocks (1) Car stereo (8) Battery (3) Air vents (2) Control arm (2) Spark plugs (2) Body (2) Key (6) Timing belt (8) Onboard computer (1) Checks and maintenance (6) Dashboard (6) Bearing (1) MAF sensor (1) Brake rotors (2) Rear bench seat (1) Headlight (2) Tail light (2) Fog lights (7) Air filter (4) Cabin air filter (5) Diesel fuel filter (6) Oil filter (5) Clutch (5) Grille (1) Window switch (1) Light bulb (4) Headlight bulb (9) Tail light bulb (1) Interior dome light bulb (3) Instrument panel light (1) License plate light (1) Handle (2) Power window motor (1) Starter motor (1) Transmission fluid (1) Engine oil (5) Clock (5) Door trim panel (8) Front bumper (3) Rear bumper (2) Shift knob (7) Fuel pump (1) Instrument cluster (3) Fuse box (10) Seat (3) Crankshaft position sensor (2) Door lock (2) Side mirror (3) Warning light – error code (3) Service warning light (17) Fuel cap (1) Windshield wipers (1) Thermostat (3) Center console tunnel (1) Turbocharger (2) Blower motor (2) Steering wheel (3)

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos