Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : Warning light – error code

Alfa Romeo 159 - Warning light – error code

Warning Light – Error Code Alfa Romeo 159 (2005-2011 / mk 1)

Alfa Romeo 159 (2005-2011 / MK 1)
How to Reset the Service Light on an Alfa Romeo 159
To reset the service light on an Alfa Romeo 159, first turn on the ignition without starting the engine. Then, press the accelerator pedal and hold it down …Read all…
Posted on 25 October 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
Reset Oil Change Service Light on the Alfa 159
To reset the service light on the vehicle using an OBD2 diagnostic system, follow these instructions: take your diagnostic system and connect it to the …Read all…
Posted on 15 September 2026 by ScegliAuto
Alfa Romeo 159 (2005-2011 / MK 1)
How to Replace the Steering Wheel Airbag and Reset the Light on Alfa Romeo 159
In this video, see the steps that will allow you to disassemble and replace the steering wheel airbag, as well as reset the light that will subsequently …Read all…
Posted on 26 May 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Alternator (3) Shocks (1) Car stereo (8) Battery (3) Air vents (2) Control arm (2) Spark plugs (2) Body (2) Key (6) Timing belt (8) Onboard computer (1) Checks and maintenance (6) Dashboard (6) Bearing (1) MAF sensor (1) Brake rotors (2) Rear bench seat (1) Headlight (2) Tail light (2) Fog lights (7) Air filter (4) Cabin air filter (5) Diesel fuel filter (6) Oil filter (5) Clutch (5) Grille (1) Window switch (1) Light bulb (4) Headlight bulb (9) Tail light bulb (1) Interior dome light bulb (3) Instrument panel light (1) License plate light (1) Handle (2) Power window motor (1) Starter motor (1) Transmission fluid (1) Engine oil (5) Clock (5) Door trim panel (8) Front bumper (3) Rear bumper (2) Shift knob (7) Fuel pump (1) Instrument cluster (3) Fuse box (10) Seat (3) Crankshaft position sensor (2) Door lock (2) Side mirror (3) Warning light – error code (3) Service warning light (17) Fuel cap (1) Windshield wipers (1) Thermostat (3) Center console tunnel (1) Turbocharger (2) Blower motor (2) Steering wheel (3)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos