Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Front Bumper on the Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Front bumper

Video tutorial

Follow the procedure to remove and replace the front bumper on the Alfa Romeo Stelvio using the instructions below. First, open the hood of the vehicle and start unscrewing the screws located at the top, also removing the plastic clips; then gently detach the front wheel wells to carefully remove the front bumper from the sides, as shown in the video.

At this point, replace and install the new front bumper, securing it properly, following the video tutorial to the end!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Alfa Romeo Stelvio
Removing the Front Door Panel of the Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this guide, follow the instructions to remove and replace the front door panel of the Alfa Romeo Stelvio. First, open the front door and start rem…
How to replace the front headlight bulb of the Alfa Romeo Stelvio
How to replace the front headlight bulb of the Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To proceed with the replacement of the front headlight bulb of an Alfa Romeo Stelvio vehicle, it is necessary to lift the vehicle on a scaffold or on…
How to Replace the Key Battery in an Alfa Romeo Stelvio
How to Replace the Key Battery in an Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Start by prying off and removing the back of the key fob for your Alfa Romeo Stelvio to extract the physical emergency key. Next, using the extracted…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos