Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel of the Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

Video tutorial

In this guide, follow the instructions to remove and replace the front door panel of the Alfa Romeo Stelvio. First, open the front door and start removing all the plugs and plastic covers located on the door panel; then, unscrew the fastening screws found underneath, as shown in the video.

At this point, pry on the sides to detach the door panel, disconnecting the electrical connector of the switch panel and the handle cable; then, simply reassemble everything by applying the reverse procedure!


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of an Alfa Romeo Stelvio
How to Remove the Door Panel of an Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) How do you remove the front door panel of an Alfa Romeo Stelvio? Disconnect the battery terminals located in the engine compartment. Using a screwdri…
Where to Find the OBD Port in the 2018 Alfa Romeo Stelvio
Where to Find the OBD Port in the 2018 Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To access the OBD port in your 2018 Alfa Romeo Stelvio, follow the steps outlined in this guide. First, open the driver's side door and enter the veh…
How to Replace the Exterior Door Handle on an Alfa Romeo Stelvio?
How to Replace the Exterior Door Handle on an Alfa Romeo Stelvio?
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To replace the exterior door handle on an Alfa Romeo Stelvio, open the door and loosen the screw located inside the hole on the side of the door. Thi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos