Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of an Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

Video tutorial

How do you remove the front door panel of an Alfa Romeo Stelvio? Disconnect the battery terminals located in the engine compartment. Using a screwdriver, remove the screws in the handle area (after removing the plastic screw covers).

Remove the trim near the door release lever; unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away by hand and disengage it from the door (disconnect the power wiring and the opening cable).

Perform the desired maintenance inside the door and reinstall the panel.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Alfa Romeo Stelvio
Removing the Front Door Panel of the Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this guide, follow the instructions to remove and replace the front door panel of the Alfa Romeo Stelvio. First, open the front door and start rem…
Removing Door Panel on Alfa Romeo Stelvio
Removing Door Panel on Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this video tutorial, you will learn how to remove the door panel of the Alfa Romeo Stelvio. First, open the door and use a screwdriver to remove t…
How to Remove the Exterior Door Handle on the Alfa Romeo Stelvio
How to Remove the Exterior Door Handle on the Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this short video, you will see the instructions to remove and replace the exterior door handle on the rear door of the Alfa Romeo Stelvio Quadrifo…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos