Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Alfa Romeo Stelvio
    4. : Removing the Alfa Romeo Stelvio door panel

Alfa Romeo Alfa Romeo Stelvio - Video tutorial

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years 2016-2024
Part: Door panel
Operation: Removing the Alfa Romeo Stelvio door panel

In this video tutorial we will see how to remove the Alfa Romeo Stelvio door panel. First we open the door and with a screwdriver remove the plastic cover in the handle: underneath there will be a screw that we are going to unscrew. With a very thin plastic lever we will unhook the frame located in the handle going to unhook it in different points until it is extracted: pay attention to the clips and the attachment points (do not break them). We remove the button part of the window regulator and disconnect the connector. We remove the reflector and begin to pry the sides to extract the panel!


Posted on 8 December 2023 by ScegliAuto



Disassembly of the front door panel of the Alfa Romeo Stelvio.
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this guide, we will see instructions on how to disassemble and replace the front door panel of the Alfa Romeo Stelvio. First, we open the front do
How to replace the external door handle of the Alfa Romeo Stelvio?
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In order to replace the external door handle of the Alfa Romeo Stelvio, the door must be opened and the screw located inside the hole in the side of
How to remove the Alfa Romeo Stelvio door panel
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) How to remove the front door panel of an Alfa Romeo Stelvio? We disconnect the battery terminals located in the engine compartment, with a screwdrive

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos