Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Replacing the gear knob on an Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Gear Shift Knob
Operation: Replacing the gear knob on an Alfa Romeo 147

Do you want to replace the gear knob on an Alfa Romeo 147? Let's see how to proceed: disconnect7 unscrew the frame of the leather cap with a plastic lever (if to be replaced), take the knob in our hands and rotate it to the left and right until it is removed from the shift rod (cut the plastic clamp). To carry out the assembly: take the new knob and insert it into the rod on the central tunnel, tighten the same in the rod; we mount the new leather cap with the clips / tightening screws. Finally, we test the correct assembly of the knob with the movement of the rod on the central tunnel.


Posted on 6 November 2023 by ScegliAuto



How to replace the gear knob on Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Obviously, as a preliminary operation, get the tools necessary to carry out the necessary work, continue by grabbing the base of the gearshift gaiter
How to remove the front bumper of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, we will have to open the front hood of our Alfa Romeo 147. So let's start by unscrewing and removing all the screws and all the bolt
Where is the Alfa Romeo 147 fuse box located
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the position in which the fuse box of your Alfa Romeo 147 is installed then all you have to do is pay attention to the following m

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos