Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 147
  6. : How to replace the gear knob on Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Gear Shift Knob
Operation: How to replace the gear knob on Alfa Romeo 147

Obviously, as a preliminary operation, get the tools necessary to carry out the necessary work, continue by grabbing the base of the gearshift gaiter with your hands in order to then unhook all the pressure hooks that fix it, then unbutton the button located just below the knob to then you can completely extract the leather boot, so now you just have to extract the gear knob as well if necessary and then compare the parts to be replaced, now retrace the steps described backwards for reassembling the various components.


Posted on 3 October 2023 by ScegliAuto



Replacing the gear knob on an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Do you want to replace the gear knob on an Alfa Romeo 147? Let's see how to proceed: disconnect7 unscrew the frame of the leather cap with a plastic
How to remove the front bumper of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, we will have to open the front hood of our Alfa Romeo 147. So let's start by unscrewing and removing all the screws and all the bolt
Where is the Alfa Romeo 147 fuse box located
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the position in which the fuse box of your Alfa Romeo 147 is installed then all you have to do is pay attention to the following m

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos