Do it yourself
| ||||
|
Alfa Romeo 147 - Video tutorial
Model: Alfa Romeo 147
MK 1
- Years 2000-2010 How to remove the front bearing on an Alfa Romeo 147? First of all, we position our car on a column bridge (jack), loosen the pins with a telescopic wrench and lift it to a preferred height to intervene. We unscrew the pins and remove the rim from the hub. We unscrew the pins of the caliper support and detach it away. Unscrew the brake disc pins and detach it from the wheel hub, then, pull off the central hub cap. We loosen the maxi bolt with a suitable socket wrench and remove the piece away. We extract the bearing from the hub as in the video and compare it with the new piece. We mount the bearing on the wheel hub and all the other pieces by proceeding backwards.
Posted on 25 November 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the Piaggio Beverly saddle with a flat batteryIn today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |