Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter on an Alfa 156

Model: Alfa Romeo 156 MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Cabin air filter

Video tutorial

To replace this filter, open the bonnet and detach the seal near the windscreen corresponding to the filter (right side of the vehicle). Now take a star screwdriver and unscrew the two screws holding the cap where the filter is located; lift the cover to access the filter.

Remove it from its housing by detaching the two side clips and replace it with a new one, ensuring it is positioned according to the arrows indicated on the replacement part. Now you can close the side clips (they will click) and proceed to insert the plastic cap; secure everything with the two outer screws removed earlier and properly reposition the bonnet seal.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in an Alfa Romeo 156
How to Replace the Key Battery in an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) If you own an Alfa Romeo 156 and want to learn how to replace the button battery inside the key, simply read the following guide carefully. First, yo…
How to Replace the Cabin Air Filter on an Alfa Romeo 156
How to Replace the Cabin Air Filter on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Before you begin, open the front passenger door of your Alfa Romeo 156. Start by unscrewing and removing the screws that secure the lower cover of th…
How to Replace the Coolant Reservoir of an Alfa Romeo 156
How to Replace the Coolant Reservoir of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This procedure must be carried out with the engine off. Start by opening the front bonnet of your Alfa Romeo 156. Next, position a container undernea…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos