Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to change the handle buttons on Alfa 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Window lift button
Operation: How to change the handle buttons on Alfa 147

Remove the damaged power window button? Let's see how the cover panel can be removed from inside. We open the right or left door and identify the piece of the control panel that we are going to disassemble. We unscrew the tightening screw near the handle (above the door cover panel). We take a plastic lever and unhook the back of the push-button panel until it separates it away from the plastic of the cover panel. Once the push-button panel has been extracted from inside the cover panel, disconnect the power window terminal. We connect the electrical clamp to the new window lifter button, we fix the push button panel in the panel.


Posted on 21 December 2023 by ScegliAuto



How to change the date on an Alfa Romeo 147.
Alfa Romeo 147 (2000-2010 / MK 1) If the mini display on the dashboard of your Alfa Romeo 147 shows a different date than the correct one and you want to manually change it, all you h
How to remove the external handle of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Let's see in this video briefly how to disassemble and assemble the external handle on the door of an Alfa Romeo 147. Insert the screwdriver in the s
How to replace the door handle in an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) This video shows you how to remove the old or broken handle in your Alfa Romeo 147, how to repair it or how to replace it with a new one. First of al

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos